Quel est l'objet de votre demande ?

Std-def-hero

HD HERO

DES CAMÉRAS ORIGINALES


Mises à jour du produit

Manuels des produits

Réponses aux questions les plus courantes :

Fonctionnalités originales de GoPro

« BACK Features 3D HERO System This latest firmware is needed to use your HD HERO cameras with the latest GoPro products. Simply download the firmware and follow the instructions above. LCD BacPac: This latest firmware is needed to use your HD HERO cameras with the latest GoPro products. Simply download the firmware and follow the instructions above. LCD On (LCO) and LCD Off (LCF) Control the power of your LCD screen. LCD On (LCO) keeps the LCD screen on continuously while the camera is operating. LCD Off (LCO) automatically powers... Read More »

Comment éviter le bruit du vent sur les vidéos

If you find that you are picking up too much wind noise in your recording, there are several things you can do to minimize this: When you don't need the camera to be waterproof and are traveling under 100MPH, you can use the open back housing door.  This will allow for more of the engine or exhaust noise to be picked up by the microphone, and override the wind noise. Mount the camera in a location that is exposed to the wind as little as possible.  Placing the camera right in... Read More »

Installation du pilote de périphérique pour le Wi-Fi BacPac - Windows 7 & Vista

This article describes the process to properly install the device driver for the Wifi BacPac in Windows 7 and Vista.  If you connect a powered on Wi-Fi BacPac and GoPro Studio  does not show it in the Device Window, this article applies to you.  Step 1- Turn off User Account Control (UAC) Instructions for Windows 7 Instructions for Windows Vista   Step 2 - Confirm that the Wi-Fi BacPac Device Driver is successfully installed on your computer To check if the Wi-Fi BacPac Device Driver is successfully installed, follow the below... Read More »

Comment nettoyer la lentille de la caméra ?

All of the cameras’ lenses are cleaned before they leave the factory.  Sometimes a thin purple film can be seen on the lens.  If this occurs, it just means that our cleaning solution wasn’t wiped off all the way. There’s an easy way to remove it. Breathing gently on the lens to fog it up and then wiping with a gentle cloth is the most affective way to clean the lens.  Repeat until clean. We recommend against using a cleaning solution.  If you use a cleaning solution, you run the risk... Read More »

Différences entre les caméras HD HERO2, HD HERO Original et HD HERO 960

You can view a comparison chart of the HD HERO2, HD HERO Original, and HD HERO 960 cameras here.

Mise à jour du logiciel de la caméra HD HERO Original

To determine if your HD HERO Original camera needs a software update, go through your settings menu and locate the LCO/LCF options. If you cannot locate this function, a software update is required.  HD HERO Original Camera Software Update The above link will allow you to download the software and provide instructions to update your camera. If you are having trouble getting the update to take, try watching the video tutorials below:   ** Please note while the video tutorial is done on a MAC, the same steps are taken on a... Read More »

Comment éviter les vagues et les distorsions dans les vidéos

If you are experiencing this wavy or distorted footage when using your GoPro during an activity where there is a large amount of vibration, it is most likely that a vibration is being emitted which is actually reaching the camera's sensor and causing the waviness. Depending on where and how you have your camera placed, there are a number of things you can do.  For example, when placed on a roll bar, add a strip of rubber (i.e. from a bike inner tube) to dampen the vibration.  With the curved or... Read More »

Installation du pilote de périphérique pour le Wi-Fi BacPac - Windows 8

This article describes the process to properly install the device driver for the Wifi BacPac in Windows 8.  If you connect a powered on Wi-Fi BacPac and GoPro Studio does not show it in the Device Window, this article applies to you. Step 1- Turn off User Account Control (UAC) Instructions for Windows 7  Instructions for Windows Vista   Step 2 - Confirm that the Wi-Fi BacPac Device Driver is successfully installed on your computer To check if the Wi-Fi BacPac Device Driver is successfully installed, follow the below steps: Click... Read More »

Wi-Fi BacPac Camera Compatibility

The Wi-Fi BacPac is compatible with both the HD HERO Original and the HD HERO2 camera.  It is not compatible with the HD HERO 960 camera. The remote function of the Wi-Fi BacPac is compatible with the HD HERO Original camera. This allows you to remotely power the camera on/off, and start/stop recording.  The smartphone application is not able to sync to the HD HERO Original camera, so live preview and mobile device functionality is not possible with this camera model.   This feature is available with the HD HERO 2... Read More »

Compatibilité de la caméra avec le Battery BacPac

The HD HERO2 camera and the HD HERO Original camera are compatible with the Battery BacPac.  The HD HERO2 camera will work with the Battery BacPac out of the box.  A software update is required for the HD HERO Original camera to work with the Battery BacPac.  To update your HD HERO Original camera software, please go to the HD HERO Original Camera Software Update page. Once you find the LCO/LCF option in your HD HERO Original camera's Settings menu, your camera should work with the Battery BacPac. Please note that... Read More »